丹东市丰蕴机械厂

we have been in innovation

0086415-6157666

Leather(PU) production line

The production line of THGZ180B leather ( pu ) uses the principle of " long net running, hot air penetration". The animal skin fibers are opened and quantified and transported to the forming section. The raw material of leather ( pu ) base material is prepared by hot air drying and cold air separation after special process treatment. This set of equipment production speed 50 m / min, design speed 80 m / min, can produce 100 - 400 GSM composite material, 24 h maximum yield of 16 t per day.This speed of equipment production is 50 m / min, the design speed is 80 m / min, can produce 100 - 400 GSM composite material, 24 h maximum yield is high as 16 t per day.

Service hotline:

0086415-6157666

1536373530108513.jpg

technological process

2.pngMain parameters

Finished product typeLeather (PU)

Heating typeElectric heating; Oil heating; Steam heating Natural gas

Forming typeAir flow drum

Efficient width:≤1800mm

Weight ranges:100-400g/㎡,(weight of pulp)

Working speed:10-50m/min

Designed speed:80 m/min

Capacity:16T/h

Equipment performance 

The production line of THGZ180B leather ( pu ) uses the principle of " long net running, hot air penetration". The animal skin fibers are opened and quantified and transported to the forming section. The raw material of leather ( pu ) base material is prepared by hot air drying and cold air separation after special process treatment. This set of equipment production speed 50 m / min, design speed 80 m / min, can produce 100 - 400 GSM composite material, 24 h maximum yield of 16 t per day.This speed of equipment production is 50 m / min, the design speed is 80 m / min, can produce 100 - 400 GSM composite material, 24 h maximum yield is high as 16 t per day.

Machine construction

Leather(PU) production line is mainly constructed by systems of feeding and its process

The feeding system is formed by units of fiber auto loading&opening, direct supplying feeder, and fans etc. 

The process section is constructed with sections of forming, transmission, heating, cooling, driving, mesh brushing and auto rolling of the finished products etc.

辽公网安备 21060302000279号